missing

Hi, I have a curious situation. In the aprilia app when I have a deeper view on the statistic's the bike is not able to get over the 60kw. It’s always stopping there. At the beginning I thought it was the ATC. But putting the bike in time attack, turning off all the helpers. There is no way...

G'day Guys, I brought this Arrow Shotgun from the UK for my 99 Millie...now I'm not that mechanically minded but am sure a piece is missing, would anyone know how many pieces of pipe I should have?....I have 5 without the silencers....should there not be 6???. I tried a putting it together off...

Having owned a mille and knowing how much I liked the feel of the front brake setup. I decided I'd change the front brake on my speed triple to the brembo master cylinder fitted to millie's Ordered a good condition used spare from ebay and a replacement lever from M&P as the ebay master cylinder...

Swopped the mille for a vfr800 last year change of plan now so put vfr on ebay, Adz who i swapped with, just contacted me and wants the vfr back so swopping back some time next week do miss it:devious. Haven't told the miss's yet see if she notices

Hi All, Collected my 03 RSV a couple of days ago and loving it so far. But noticed while cleaning the old girl last night that the lower/rear right faring around the exhaust link pipe area looks to be missing a bracket or two There are 2 unsed mounting holes and this part of the faring flaps...

Changed the plugs on the mille yesterday and noticed that the air box has what looks like a missing pipe (picture attached showing right side of the airbox) I assume it's the breather pipe for the forward cylinder as there is a similar set up on the rear cylinder. The problem is that I cannot...

& will eventually be getting another... when i get a garage to keep it in for an optimate !! :biggrin its replacement... oldskool GSXR 1100G... GSXR 750M... & current ZX9R C2 just doesnt cut it... & make my neck hair stand on end like the Mille did... lol !! :eatcorn was even offered a...

The attached Photo is from behind the dash board on a 2004 Tuono 10000. Can any one tell me what should connect to the center connector? Connection to the right is for the head lights. Connector to the left is for ignition. Regards AVRO

Hi Guys, I have an RSV SP race exhaust system as attached. Unfortunatley it has a piece missing as you can see in the photo. I have been told that in order to have this piece made up it would have to be copied from the actual part. I dont suppose for one minute that someone has this missing...

Hi all I got this bike a few weeks ago RSVR, after stripping it down and checking it over, the air box lid was missing. The injection intake flaps were covered in probably years of grime and *****, I pressume running it like this is not good. I have since cleaned the intakes and...

Gadgies, When I started oot on bikes years ago there seemed ti be a bit'o "we're awe in the same boat" aboot it. If yi wis driving doon the road yi wid wave to anither biker and got a wave back. In fact I mine if yi had a passenger, it wis their job ti do the waving. However over the last...

Got the bike started and it sounded like it had a miss fire but now on further investigation its a pipe missing from the carb, I havnt got a pic but I'll do my best to explain. Right hand side of the bike looking under the carb theres a brass nipple that's sucking when the motors running...

It's not unusual for me to miss gears and find false neutrals but yesterday at Donnington it happed quite a lot (both up and down changes) sometimes with some fairly scary results. Anyone got any ideas what the cause(s) might be? I've changed the clutch lever recently but can't think of anything...

Well i have been missing all the abuse, so here goes, hello all everyone ok?

Ok then at the risk of sounding like a complete dick! Underneth the clocks and behind the headlights there are 2 white multi plugs, what do these plug into. I am rebuilding after an off which destroyed the front end, i have connected the headlights, small bulbs in the bottom of headlights...

hi guys, i dont post much but would appreciate you input into this.. i have just paid 420 for a full service 18000 miles..when the bike returned i notice that the rear is missing 1 bolt and one is well loose..these bolts hold studs which hold the sprocket in place as far as i can see, and can...

sorting my bike out today and noticed in the manual it said I had a Idle adjuster on the right hand side. though humm, yeah adjust my idle. cool. Wrong, just a bloody hole where one should be and a what looks like a flathead screw on the engine.:dunno:dunno Where can I get a idle adjuster...

Whilst cleaning the rear of my bike, i noticed the lower right hand side rear part of the bellypan of the bodywork ( where the link pipe comes out of ) has screw holes in it, but there not secured to anything, and it's flapping about....... I don't want it to break off so was wondering if...

ok so 12 SS disk bolts cost £46+ from rsv.net or pro bolt or such like my local tool factor does m8/20 A2 and A4 bolts for about 10/20p each. granted they are not polished , but jeez even im not lazy enough to pay some one else £3.80 to polish the head or am i missing something?????

as the title says ? you lot on this forum :devious weather, who cares if its wet? all the more fun!!! where are you all?:lol taken today after going to southern cross for suspension set up!(rsvr47's in background)