lines

Hi guys, Does anyone know of an adequate but affordable alternative to using the factory high pressure fuel hoses & connector for my Mille. Mine has a quick release connector on it as standard which I would like keep. It is leaking from somewhere, maybe the connector itself but the hose is...

Finally got me a clutch and front brake lines for the Mille, slight problem possibly though. The brake lines are marked up for use on a '98-'03 Mille (mine's a '98, red caliper model) but the hoses don't have the 90 degree angle at the end of the line. Am I being a tad stoopid and not seeing a...

Tuono Brake/clutch lines Good evening, i'm just converting my mille to have the tuono bars. Has anyone got a spare clutch line and front brakes lines they want to part with for some cash? :thumbup Doesn't matter if they are the standard lines if you have upgraded to some aftermarket ones...

Hi guys wonder if any one tell me , is there anything to be gained from going from the standard 1 into 2 front brake lines from the master cylinder too calipers , too two individual lines ie one too each caliper from the master cylinder ? Thanks eddie

Planning to fit a set of Gilles variobars to a 2003 RSV Mille R (radial brake caliper model) and require longer brake lines. I have noticed the standard braided clutch line and front brake lines are of the same material and have the same text printed on the outer to identify diameter etc...

Hi all, As part of the project I'm trying to get hold of the oil lines from an early (2003) Mille. I've got the tank and cooler but the Falco lines will look a bit odd. Anyone got any? Cheers, Rob.

Want to fit HEL brake lines to the front and just wondering which ones I should be looking at. I've got the '03 Racing, which has radial calipers but not the m/c to go with it, so I fitted a forged Brembo m/c I had for a project and had Venhill custom lines made for it. Just a bit confused on...

Goodridge braided brake lines, front and rear. Removed from a 2000 RSVR. Completed with all fixtures, washers etc. Nothing wrong with them, I've just changed to coloured lines. £30 posted. Well it is xmas....

Hel brake lines, 2 front 1 rear and 1/2 L motul Dot4 fluid £68.99 + £5 post. This deal is for all colour's and all bikes, please call the shop to order as our site is being re built. Cheers Mark _________________

Just wondering if anyone had picks of the lines that relief the pressure in the crankcase.

Front brake lines for 03 Rsv very good cond I've Changed to Tuono bars so these are up for grabs , £15 posted

These are Hel Braided hoses for anyone whose doing a tuono conversion etc, will fit any year, but made for the MK1 tuono, so 02 to 06 I think that is? As new only fitted to my bike for less than a month. £35 delivered! Bargin!

Hello all, I am new to the forum and recently picked up an '04 RSVR. I just ordered a set of Apex bar risers and will need longer front brake lines. My question is will the brake lines from a Tuono fit on a stock RSVR from brake unit and to each caliper? I have located some galfer braided...

Finally managed to source some s/h risers to go with my variobars. These are 60mm risers,my question is has anyone else got this set up and what else is required? Guessing longer brake lines but how much longer?60mm rise but forward and back potential as well. Clutch line and throttle cables as...

Hi there Has anyone any good advice for me looking to upgrade and up bling my dirty brake lines and clutch lines on my 2001 rsvR. Any advice welcome Thanks Jason

Anyone replaced the fuel lines on their 04 bike...(manual says renew every 4 years )...if so where's the best place to buy from :thumbup

Well, in an effort to try to persuade the Cornetto (07 Tuono R) to turn tighter I have been dropping the forks in the yokes a line at a time. I have been riding round with 3 showing for a month or so and it felt pretty good, but i still thought that there was a little more to come. So dropped...