installation

I picked up an Arrow GP2 for my 2013 Tuono. Anyone know an easy way to get the old seal ring (lead?) off? It looks like it has to be removed so the new one can slide on. Is there anything I should replace it with when installing the Aarow?

Hi guys as per the title I'm trying to install a Koso gear position indicator on my 2007 Gen 2 Tuono R, doing a search I discovered some people have successfully done this but mine is just a random number generator, I've picked up the speedo pulse from the rear wheel sensor and connected to one...

I am rebuilding a 2004 engine and now need to fit the pistons. After researching many manuals I only found 1 comment that states that the gudgeon pins are off-set and pistons must be installed with the pin off-set to the front of the vehicle. I would appreciate any comments for some peace of...

Im guessing this has been asked before many times but how do I install the O2 sensor And I just replace the original and leave it connected to the pc v optimiser? Do I HAVE TO drill another hiker and weld bung in place? Could I use the "spare" plugged bung coming off one side of the head( by...

Looking at the service manuals you need to drain the tank of fuel before being able to remove the fuel delivery pipe? Any way around that or a link to a guide somewhere?

Walk through on installing the GBMoto rearsets sold by Griff of Aprilia Performance The standard pegs need to come off, along with the rear brake and associated plumbing. When you remove the brake master cylinder remember to replace the bolts into the crankcase as they hold the covers on as...

If you have an early mille and would to have the wind deflectors installed, well you can. It’s not that difficult. You just got to have a little bit of faith in yourself as it involves drilling your front cowling Hope this guide helps. A downloadable version available at the bottom...

Just got some super sexy swingarm covers off boyler. Just wondering what people are using to stick them on with- adhesive/tape. Really I want stuff that is strong yet doesnt mark the swing arm when you remove the covers. any advice?

If you have an early mille and would to have the wind deflectors installed, well you can. Its not that difficult. You just got to have a little bit of faith in your self as it involves drilling your front cowling :) Hope this guide helps. A downloadable version available at the bottom :thumbup...