This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

high

  1. S

    high tempreture grease

    Afternoon gents, ive just fitted a new stator to the bike and i would like to put high temp grease in the block connector to the reg/rec , anybody know where i can get some? I also re routed the cable, rather than going through the middle of the v as fitted at the factory, was loads easier and...
  2. J

    V4 at high revs

    Hi. Having never been on a V4, at high revs flicking through the gears, is it normal for the engine to almost sound like the clutch is slipping, as it's revving so high? It's only my third time out on this Bike & my god I'm in love, With out a doubt the best bike I've ridden...
  3. B

    High Level Handle Bar Set Up for sale

    For sale as per title high level bar set up (Renthal) from my '01 Mille RSV 'R' to suit 51mm ohlins forks. Consists of C'n'C (cool n comfy) 51mm ohlins fit billet top yokes with risers and clamps to suit 22.2mm (7/8") Renthal handlebars, the yokes are machined from aero spec billet alloy and are...
  4. P

    EFI and Red warning triangle coming on at high RPMs. Help

    Any help would help fellas. So I have a 08 RSV 1000R the bike has no codes as I have checked. The issue I'm having is the EFI and red triangle warning light comes on when riding hard and The RPMs are high. As I slow down and shift the light goes away eveytime.. the oil level is good, coolant is...
  5. Roostingu

    High Beam adjustment on 2016 Tuono 1100 RR

    I have a 2016 Aprilla Tuono 1100RR I understand how to adjust the low beams but the highbeam seems to be at the identical height have not figured out if the highbeam can be adjusted separately or if the whole unit is adjusted with the one knob. It seems to me that if the highbeam was slightly...
  6. T

    Virtual high five

    Hi guys and girls, a quick hello, I've just brought myself a bargain 99 rsv, will be on road soon and can't wait to experience her (sounds dodgy). Ride safe
  7. O

    EFI warning at high revs only.

    Ok, bit of a weird one here. The bike runs fine untill it's revved hard from about 7k rpm and above then the efi warning light comes on, no real lose of power at all. Then as the revs fall past 5-6k rpm the warning light goes out again, all seems fine untill you stop then it struggles to idle...
  8. C

    High coolant temperature

    Out riding yesterday and everything was fine until I saw a red triangle warning light and coolant temperature went from 77c to 135c! Stopped bike waited 5 minutes then all returned to normal?? Started up and rode 20 miles and it came on again. Seemed to be every time I turned a slow tight turn...
  9. nedwood

    oil level too high

    Just got my bike back from an oil change. The oil level is well above max. i know you should take it out for a 10 mile ride to get the correct level, but its p*ssing down with rain. If they have overfilled it with oil, will i damage it taking it out for a 10 mile spin?
  10. Daz1966

    High Beam is Poor

    Hi guys, I have to say I'm not impressed with the high beam on my gen 2, Low beam has a great spread of light with good intensity, the high beam is focussed at the correct height but lacks the intensity of the low beam, the bike has OSRAM bulbs fitted to all 4 lights, what's your impression of...
  11. Spliggs

    2001 RSV Mille high pressure fuel lines ?

    Hi guys, Does anyone know of an adequate but affordable alternative to using the factory high pressure fuel hoses & connector for my Mille. Mine has a quick release connector on it as standard which I would like keep. It is leaking from somewhere, maybe the connector itself but the hose is...
  12. I

    high mileage what's yours done

    Hi folks new to this forum. I have not yet bought a tuono as I am looking for a 2003 racing I know very rare but I can dream lol. Just wondering what sort of mileage your bikes have and any one know of any really high miles. Many thanks Spence
  13. bash62

    high mileage

    anybody done over 20,000 miles/32000 km yet..just wondering if all sweet at that mileage cheers bash
  14. RSV_Ecosse

    Hugger decal kits - 5D High gloss carbon

    Folks, I have put together a rear hugger decal kit for Gen 1 Mille's and Tuono's. Initially I just did this for myself but I thought if enough interest was displayed I could maybe put more kits together for anyone else who wants one. Stuck a quick post up on the Facebook page and it looks like a...
  15. R

    bike feels unstable at high speed

    hi all, I'm new to all this so please be patient with me, when travelling at speeds your mother would cringe at, my bike feels very light and the handle bars have got this slightest shake on them, I'm in top gear yes I'm going full chat this happens anything over 115mph where law permits...
  16. RSV_Ecosse

    Mille Twin High Mount Renegade Stainless Exhausts

    Ok folks, I've owned this system since 2008 and it's been simply awesome. I now find I want to go the 2-2 route so I'm putting my beloved twin high mount Renegade 2-1-2 system up for grabs. It's got Stainless cans and is in excellent condition. The cans themselves are excellent with only the...
  17. flatlander

    High level street fighter falco exhausts

    High level street fighter falco exhausts I have some spares of these. They are in need of tidying IMHO have never fitted them since buying them so can't comment on state other than to say they are not immaculate and could do with a refurb. I paid 150£ plus post for a pair and have done...
  18. B

    Geared too high - 16 tooth fix

    G'day Caponuts, I have just had a 16 tooth front sprocket fitted and can report that 3rd gear is now useable at 60k/hr 3,600rpm (lying speedo says 65k/hr). 1st gear is happy on roundabouts/slow traffic without pulling the clutch in, and 6th gear can be used at 100k/hr (4,200rpm...lying speedo...
  19. Markey

    Aprilia Tuono GPR High Level Exhaust System

    Ebay Link Chaps Aprilia Tuono GPR High Level Exhaust System FAST DELIVERY AKRAPOVIC LEO VINCE | eBay Mark
  20. trickymicky6

    GPR high level carbonox link pipes

    Have got a brand new set of GPR High level link pipes available for sale with all the springs & fittings, exhaust bands etc still in manufacturers packaging. They were a replacement set for the originals as the spring retaining lugs were welded in the wrong place. I never got around to...