fix

ok hi all... have an issue getting info for the RST speed sensor wiring to my mille wiring as not compatible. have search for ages on the web but no joy. can someone please put me in the right direction for any info please. thnx Hess

Hi Everyone !!! Im new here.I want to know is there real stator fix not just gessing what to be the problem.The brown conector mode is done ,onother regulator stronger type is in. Thid Rick generator cures the problem becouse from what i figured out the heat of the bike melt the wires .Every one...

I bought a 2003 Mille in January and almost pooped myself when I put it on its stand, I thought it was going to continue leaning til it fell over. Thankfully it didn't but it was very precarious. I looked on here and apparently it's a common problem with the standard side stand. I played about...

Hi guys, after a bit of advice and info...clutch slave is goosed on my T and was looking at replacing with an oberon model for circa £90. There are probably a few of you guys that have already done this mod and was just wondering how good they are really...any views much appreciated :thumbup cheers

I have installed (but not road tested yet) 2 x Philips AirFlux 6000K X-treme Vision LED's to my low beams. They are common knowledge in the RSV forum as they have the same headlights and suffer the same heat degradation of the reflectors under the H11 standard halogen bulbs. These Philips LEDs...

Hey everyone, against the collective opinions of many forum members here and on other forums, I bought my 04 Tuono 1000R for my first bike. I'm 22 and got tired of my girlfriend's 250 in about a week so I bought the cheapest liter bike on craigslist and now, here I am. On the ride home, I...

G'day Caponuts, I have just had a 16 tooth front sprocket fitted and can report that 3rd gear is now useable at 60k/hr 3,600rpm (lying speedo says 65k/hr). 1st gear is happy on roundabouts/slow traffic without pulling the clutch in, and 6th gear can be used at 100k/hr (4,200rpm...lying speedo...

Hey Guys - just bought a beautiful 02' Capo and I'm taking it on a 1000 mile trip a couple days after I pick it up. I've read about the issues that might strike this bike and wanted to see if there are thoughts or a good list of pre-emptive fixes to make right off the back. What do you think...

Hi guys. Just want everyone to know i recently did the brown & white connector mod and changed the spark plus on my 2003 RSV. It has literally made it a new bike. It starts and runs so much better. Anyone with a RSV that is temperamental when it comes to starting i can not recommend doing...

Posted for Grin Factor ! All you need is a pair of scissors and some plastic - i used an old take-away curry tub. The idea is to make the existing seal on the filler cap seal tighter against the tank, to do that make a plastic washer (i used 2) Washer size: Note: you dont need to...

Hi all, I recently bought some AP rearsets and couldn't see a way of fixing the bracket that goes between them and the fairing below. I just left it thinking it would be sturdy enough without them but have now noticed the fairing is hitting the swing arm and the gear linkage. I am just...

Just finished running my APRC Tuono V4....Incredibly quick and powerful bike needless to say but very harsh suspension for real world riding comapared to the plush-but-firm suspension on my old Ohlins equipped RSV-R twin...... Sachs suspension, dialled all the way back and it's still nearly...

Please help,does the 05-07 side stand fit straight on and solve the upright issue when parked up,on my 2000 Mille r

Right I can fix car tyres no probs with the equipment you can store in the boot no probs!! BUT------------ON A BIKE SPACE IS LIMITED!! I have just bought meself 1 of these...

I’ve ridden my just purchased 2007 RSV twice and I suppose I’m lucky I didn’t break it before I had a chance to fix it! I'm dieing to get this bad boy back on the road. With the recent crappy weather I’ve learned the following (if I totally screwed something up please let me know): 1) How to...

A few days after buying my Mille, the speedo sensor showed it's Italian heritage by croaking. The price of a new sensor seemed excessive to me (~£72) so I looked for an alternative solution, preferably one that would have a greater life expectancy and would be easier to source. The original...

Hi there, One of the rear brackets on the stainless steel oil tank has got a hairline crack where it is welded to the tank :dowhatand the oil is very slowly seeping out. Before I take it off I would like to give the guy who is going to fix it some info on the type of metal.....does anyone know...

just put the forks back on, they seem okay but it was raining so difficult to tell if the leak is still present. Whilst the bike was sitting it seems to have developed a leaky clutch slave! If i buy an mpl do they do spares for them? Or am i better off just getting a new seal? I know the mpl...

is their anyway to fix or clean it the speedo sensor? Mine threw its hand in yesterday and I need it sorting. Cheers

Took the bike out for a good thrash today. Making my way home late afternoon near Bath and opened her up to overtake a car and suddenly no power and wouldn't rev :dunno Pulled over to the side of the road and found the throttle had gone. Middle of nowhere and had forgotten my mobile :jack...