coil

As above, anything considered as they may need altering to fit my falcuono Mark

Needed a stator coil for my 2004 RSV

Wanted for a Gen 1 Tuono: - Gen1 right hand coil cover (sits below tank) in battery grey with gold mesh... perchance anyone has a spare (due to upgrading to carbon, etc). Must be in v-good condition with no damage. - Rear Sachs (or Ohlins - if cheap enough!) shock. Must be in v-good...

Hi all. Im after a rear ignition coil for 2008 model. Many thanks bearshead

Hey guys, about to install new HT leads, and I've completely forgot which orientation they go in. long lead to which cylinder or which coil pack to which cylinder?! Stu

As the title says I think I have an issue with the Coil on my 03 milie. When the bike gets hot (Above 85) in city traffic it developed a misfire when accelerating. I'v read here its the coil breaking down because of the heat and expansion breaking the contact on already damaged wires? My...

OK, so while tiding up loom routes while fitting Samco hoses, i rerouted the HT leads from coil to plugs so nice and tidy. I had changed spark plugs 2000 miles ago when I first got bike and made damn certain HT caps went back to where they came from On the bike, the Front HT coil agreed with...

Hi all 2003 Gen1 RSV / Tuono conversion Need coil covers and water bottle cover.....pref carbon Help !

Hi all As the title suggests I need carbon covers for coils both sides and a water bottle cover. I would look at non carbon items because I can get them carbon dipped. Any help would be great. Cheers

Hey guys, I have just purchased a new set of HT Leads from Magnecor for my '02 RSV. Gone to fit them this morning and have found that there are no connectors on the coil end of the leads. When removing the originals it appeared that they had no brass connectors which hold them in the coil...

Does anybody know the coil max output voltage for the Gen 1 coil packs ?

Evening all As per the title really, still looking for a LHS inner air duct and coil cover to replace my damaged ones for a Gen 1 Tuono. Rare as hens teeth on e-bay but I was thinking some of you bling meisters might have replaced them with carbon and had the oem stuff gathering dust...

As per the title really I'm looking for teh air duct (both parts) and coil cover for the LHS of a Tuoldo............ I know that they are like rocking horse doo doo but if you don't ask, you don't get. Failing that does anyone know of a UK supplier of fibreglass replicas 'cos it's only...

I get the Diagnostics code 35 and there is no signal on my second(left rear ) coil. I checked the connections to the ECU and after I fixed the spliced cable which was shorting to chassis after riding it like an animal. :pirate I also had a fuse blown on me on ignition 2 i assume that was dude to...

Hi there, I need a set of coil covers and air intakes to convert a mille into a tuono. Not bothered about condition, can be plastic, grp or carbon if not too expensive. Cheers Dave

hi guys bike seems to be only firing on one cylinder done all the checks diag code is 33 i have come to the conclusion that its not sparking on the 4a port on the coil pack a) could i be wrong and are they prone to go b) would it be best to buy new or second hand c) itsa a 2008 rsvr under...