This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

change

  1. D

    Oil filter change.

    Hi, got a new oil filter on order with Fowlers going to carry out an oil and filter change, how do others fit the filter, last time I tried fitting the filter first followed by its cover, then I tried fitting the filter into the cover first and then tightening the cover screws evenly. Actually...
  2. A

    Oil change and other service items

    Hi guys I'm in the process of re-commissioning my 2005 RSVR which has been off the road and garaged for about seven or eight years. The oil level is good but obviously I intend to change the Oil and filter for starters . I looked on eBay for an oil change kit but most of the vendors...
  3. T

    Oil change

    Hi all Just done an oil and filter change and noticed that when the engine is running the oil tank is filling up all the way to the top, I drained it back to the level on the tank started her up again and the same thing happened!!!!! Any ideas.
  4. C

    oil change brings that sinking feeling.

    Hi guys, I've not long purchased a 2003 rsv1000r it had plenty of kms on it at 70,000 but after lots of homework and research found that the milage (servicing considered) was little reason for concern. Here's where the depression set in, I gave the bike an oil change, taking care to use clean...
  5. N

    Change Parts CAPO1000

    Change Parts CAPO1000- Start up issue Hi, i'm a new user , i had get a capo1000 2001. In Portugal this bike is like a black sheep, due some issues . They Call it "Avarillia" , from Avaria and Aprilia. Avaria Is a breakdown\issue\problem. The things i read it was some brown conector and a...
  6. N

    Just wondering how many of RSVR owners had to change out their flywheel magnet.

    HI, Guys Just wondering if anyone of you had to swap out your flywheel magnets due to failing magnetism. I was under the impression, magnetism should last quit long time but I was told it is possible to loose magnetism and not produce enough currents. any inputs are appreciated. Thank you .
  7. C

    DIY suspension height change?

    What's up everyone? I bought my Gen1 lowered a few inches which didn't really bother me too much at the time but I'm having some stuff worked on with my bike and figured I might as well take care of it now. Is it a DIY job? Its around $100 for a shop to change and "tune" it for me but if I can...
  8. nedwood

    gearing change

    Hi, i am thinking of changing the gearing on my gen 1 Tuono, and i have read on here about changing to a F 16 R 44 sprockets which takes the gearing to 2.75. you can also get a R 46 sprocket which changes the gearing to 2.70 with the F 17, which is a cheaper option. Pros and cons about just...
  9. C

    clocks / dash change

    Hi again guys having exhausted most other options i am looking at replacing clocks on my 06 tuono :thumbdown if i can get a second hand one , big if , so long as i have the related code i am ok ?. or if i purchase a new one off shelf whats the story with code ? do i set code when flashing up...
  10. R

    Engine change!!

    After the bottom end went in my 2009 T I replaced it with a very low mileage 2006 I picked up for £600. It's been an emotional few weeks. After my bike shat it's self the quickest and least complicated choice was to change the engine. It was fairly plain sailing to begin with until the...
  11. R

    time for a change

    hi folks I've got a 2011 tuono v4r non aprc and i fancy the 1100 version is the enormous expense to purchase this version worth it?
  12. L

    exhaust change Gen1 Tuono 2 in 2

    ever since bought Tuono thought it would look better with twin pipes, took some hunting down was lucky enough to get Akrapovic front pipes off Ebay and original footrest hangers with exhaust mounting lug on left. Also through Ebay found Power Tech who do 60mm inlet on silencers with spring...
  13. H

    Handle Learning after demand sensor change?

    After my demand sensor went at Anglesey it put me in limp mode and through up a few fault codes :( I replaced the demand sensor and the fault codes and limp mode disappeared. My question is do i still need to do a handle learning even if the bike seems to be fine?
  14. M

    '06 Factory coolant change

    Hi guys I want to change the coolant on my '06 Factory so was wondering if there's any special procedure for doing it or not ?? I'm assuming it's just a matter of taking the bottom hose off the rad etc but is there a drain plug on the block too ?? Also is there any specific brand of coolant...
  15. C

    Frame Change

    Hi im new here, ive got an RSV frame number ZD4RP00001S, Due to a little accident im going to need to repalce the frame ,ive seen a cheap T plant frame 1998 on Ebay would this be ok.cheers
  16. bash62

    time for a change

    so been running dunlop roadsmart2 ..great tyres wet n dry and 3500 miles out of the rear,,but gonna give michelin pilot road 4,s a go cheers bash
  17. J

    Guides how to change my 99 millie from kmh to mph please help!

    Hi guys and girls, I've got a rsv millie on a 99 reg. I changed the exhaust, went to start to see how she sounded (amazing ) but the bike hick upped when started and the dash turned into kmh where it was mph. Please help.
  18. F

    08 tuono fuel filter change ducati filter

    just changed my fuel filter, the ducati one is exactly the same but much cheaper :)
  19. S

    Oil change

    Me again what is the best oil to use in my 2005 rsv ive had conflicting reports Cheers
  20. 4vr

    look change up!

    also had some rs10's fitted :) cheers