bolts

I have a batch of quick release seat and tank pins here £15 a pair Makes getting to the battery easier etc. Please message me

Could anyone tell me the correct torque setting for the front wheel spindle clamps at the base of my Ohlin's forks (Tuono Factory 2006) Leslie

Good Morning/Afternoon All, Looking to by a set of the 1/4 turn Fairing bolts for my 06 RSV1000R Factory. Currently have the bolts on there but they are starting to look pretty tired over the years. Only ones for sale i can find are the D-Loop kind whereas im looking for the hex key ones. Anyone...

Hi, I would like to remove the the crash bungs (located near the rear brake and gear lever) which came already installed on the bike but I don't have the engine mounting bolts. Can anyone help? Thanks

Hi Guys Can anyone confirm the size of the rear brake disc bolts for a 2008 Gen 2 Tuono? (and the Banjo bolt if poss) Need to replace mine for High Tensity Stainless Steel as they are rusty ;)

Thought I'd share following for benefit of Tuoldo owners: I bought some stainless steel replacements, but was warned the original bolts are made of cheese, and the Allen key heads round out easily. They are and they do! But if the right technique is used, there shouldn't be a problem...

Hi guys, Just tried to remove the handlebar riser bolts on my Gen1 - no joy - no move !!! I'm a bit concerned about stripping the threads, so does anyone have any serious suggestions to help me out. I can't see any way to get any WD40 into the threads. Worried that there may be...

Anyone know a supplier of replacement disk bolts? I can only find ti at a laughable price. Not tried stealers yet as expect a a similar huge cost to ti ones. Stainless will do and will look a damn sight better than the rusty ones currently on the bike.

Folks, Would be much obliged if anyone can advise on the bolt size (mm diameter + length) for a standard 2003 model (2004 plate) Tuono for: - Front callipers: - Rear calliper: Planning to replace rusting originals with stainless bolts. Thanks in advance.

Grade 5, 6AL/4V Titanium Bolt M10 x 60mm - 4 pcs £20 delivered. i believe the Tuono ones are 55mm, if you need these cutting just let me know.. :thumbup

Hi all Any ideas where I can get 2 x new bolts that hold the tank in place at the front on my Gen 1. On riding it today, both had come out!!! One was down the side of the bike and the other nowhere to be seen, I'm guessing these weren't the standard ones as one hardly bit at all...

Has anyone else suffered shearing of mudguard retaining bolts or exhaust bolts shaking loose on 2013 1200 luggage pack Capononord? Happened to mine at 1650 miles. Aprilia say probably due to rear tyre change by specialist tyre fitters over tightening. Tyre fitters say as both sheared on one side...

Does anyone know the size of the bolts that hold the seat in place on my 08 mille. Having charged the battery I have mid placed mine can I get these from half it's or DIY store or is it a aprilia product only. I know they will charge me a fortune for them Cheers Tony

Hi guys Does anyone know the size of the bolts that hold the seat in place on my 08 mille. Having charged the battery I have mid placed mine can I get these from half it's or DIY store or is it a aprilia product only. I know they will charge me a fortune for them Cheers Tony

On trying to take the front seat on my g2 T off why oh why do the 8mm bolts just turn and not come out am I doing something wrong :banghead:banghead:banghead

Hi guys I've have got a gen 1 with non radial been i calipers and after some new bolts which hold the two caliper halves together as well as the bolts that hold he caliper to the forks. I have tried aprilia Yorkshire but they only sell them with brand new calipers. Anyone know where I can get...

I never imagined that the first job I did on my shiny new Mille would involve taking a drill to her, but when I went to take the tank off, this is what I found: I've never been so careful with a Black and Decker! I managed to get them both out with out damaging anything and they will be...

Hi guys, on my 03 Mille, I have some (I assume) original quick release screws on the main central fairing. Anyone know where I can get replacements? Ta very much in advance.

Guys...........i'm looking for a set of bolts that connect the 2 halfs of the airbox if anyone has any??

Morning all... Work on the Mille is coming along nicely (although a little slower than I would like) - oil and filter changed, coolant changed, new tyres on, new battery on the Oximiser, next job is the chain and sprockets but I've a small problem... I was going to change the rear sprocket at...