22

Hi. Just picked up an SP Arrow 2-2 full system for my RSVR 2000 with a Power Commander3. I have noticed on a few searches that some guys are wrapping the rear header. Does anyone have any experience with these exhausts. Cheers.

asking about 600 € any questions on : [email protected] Best regards

Hi guys , ive got a 2002 mille with a full akrapovic 2into 2 system on , and noticed the chains been catching the left hand link pipe , wondered if anyone else had a similar problem , chain is adjusted correctly , i have an ohlins remote preload shock on it so backed that of a bitg thinkin...

Well here's the best and rarest piece of my 2003 RSV, slight scuff on the left hand exhaust as shown in the picture. Going for £600 or nearest offer.

As per subject, for sale in the next couple of weeks. Looking for £230 O.N.O + post It has as you can see been polished by myself and has come up quite nicely (not as good as a professional job but its much better than how it was when I got it!). Downpipes and collector only. Does have a...

Hi Guys I know this is in the wrong section but couldn't find a "swap section" I have a near mint condition Harris Performance Troy Corser replica twin system for the Gen 1 Mille and wanted to know if anyone has an Akrapovic 2-1 Full Titanium system (the one with the 65mm bore end can)...

2001-2003 RSV Mille and 2002-2005 Tuono. $800.00 + shipping. This exhaust have some scratchs and dented point. Please check the pictures. I am live in Korea. I can ship to anywhere.

http://i1052.photobucket.com/albums/s460/nall39/e0bf798c.jpg http://i1052.photobucket.com/albums/s460/nall39/18591581.jpg http://i1052.photobucket.com/albums/s460/nall39/10a8648b.jpg cans and link pipes as shown with carbon hangers excellent condition (been in a box last 2 years) one small...

Hello gents, New on here, looking to kit my tuono out with a full 2-2 acrapovic or potentially arrow system..anyone got a nice set needing a new bike?? Cheers, Jack

I've been looking for a replacement link pipe for my Akra 2-2 Ti system for years without any luck, does anyone know where I can get a replacement pipe made up from stainless steel or similar? I have the old pipe so could get the correct dimensions, or even send it to be copied if there are any...

This is the Aprilia / Akrapovic EPROM that came with my 2-2 Akrapovic full exhaust system (http://www.af1racing.com/store/Scrip...idproduct=3144). I used the chip on my Mille for a while with good results (at least according to my butt dyno) but replaced it with an EPROM from an Edwards Replica...

So I have a birthday coming up... http://www.ebay.it/itm/SCARICO-COMPLETO-LEOVINCE-SBK-APRILIA-RSV-1000-R-2000-/400084555643?pt=Ricambi_e_Accessori_Moto&hash=item5d26e5d77b#ht_2821wt_1037 Please?

Looking for a normal level 2-2 exhaust, can't do high level as the Mrs will need to go pillion on the bike. If anyone has owt or knows then please let me know. Cheers guys.

Ok guys, i've got the parts stripped from the bike now, pictures will be added for everything now.... Arrow twin system (devil cans NOT included but available seperately).....no longer made and like "hens teeth" to get hold of! Comes ready to fit with springs and high level hangers..... £200 +...

Do you reckon it would polish out ????

FOR SALE For sale are my Falco SL1000 exhaust pipes which i originally bought to do a 2-2 conversion on my 2001 RSV-R, selling due to getting a telco system instead. They are in very good condition, although i don't have the rear header as the RSV header is the same size so it bolts straight...

Hi everyone, im looking to buy a full 2-2 exhaust system for my 2001 RSV-R, any offers or help would be much appreciated. My budget is around 500 quid, must be good condition. Thanks!

Titanium Akra cans from a 2-2 system. LHS can/link has some low speed spill damage. Includes link pipes, carbon mounts, carbon hangers and baffles but no springs. £250 + postage :thumbup The damage isn't that obvious once fitted....

Titanium Akrapovic cans from a 2-2 system. LHS can/link has some low speed spill damage. Includes link pipes, carbon mounts, carbon hangers and baffles but no springs. £250 + postage :thumbup

Alright guys, here are the pics of the 2-2 system. I cannot find one small section (pointed at in the photo) basically it's a semi circular (rainbow) shaped section which joine the front and rear pipes at the collector area. I dare say it would be easy to have made up, or i can supply the piece...