Wont Calibrate

Aprilia Forum

Help Support Aprilia Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
May 15, 2014
Messages
45
Location
Isle of Man
Hi All,

Spent this morning fitting the T15 sprocket to the bike - makes it much nicer. I also noted that the chain in any case was too slack so took thatr out as well.

problem is, the bike wont now complete a calibration, and so now Im stuck with no TC and a warning light.

Any ideas?

Gavin.
 
Once you have gone through the calibration cycle you have to turn the ignition off for 30 seconds if I remember correctly then turn the traction control back on.

I was baffled by this initially, but from memory I just had to hit the + button on the left handlebar to put the traction control back on.
 
Yeah. This took me a while too. You have to ride for a short period of time at 24 mph in second gear. It will calibrate. You then switch the ignition on and off and select a mode and level. It switches it all off by default and the warning light will stay on. It has calibrated though.
 
Jist ride the fooker,,,,,,,,,,,,,,,,,bunch of techno fuds. :no
 
Ha ha! You don't want to seel all the gadgets I have attached to the handle bars too then :lol




... and I'm still slow!

You need a feckin huge magnet on the front of your bike to keep up with Mr B.
 
Speaking of calibration, the dumb-*** at the dealer went and turned it on when I was leaving from my first service and it stayed on for like a half an hour on the ride home. Does this require me to re-calibrate it again?
 
Hi,

Turns out that it HAD calibrated, it doesn't say in the manual that the ATC then turns itself off, and has to be turned back on again. Bit of an omission really.

Anyway, its all good now.

Gavin.
 

New Posts

Back
Top