Joined Oct 2009
3K Posts | 1+
yes and no
not a straight swap
for the front machine 2.5mm off the calipers or i think you may be able to machine the disc mounting faces
rear only a small spacer required ..think its a mm or 2 difference
not a straight swap
for the front machine 2.5mm off the calipers or i think you may be able to machine the disc mounting faces
rear only a small spacer required ..think its a mm or 2 difference
Joined Jun 2009
888 Posts | 0+
Sunny Oxfordshire
yes mate it should be a straight swap - as you have the radial brake setup. the rear is a touch wider on some bikes, its trial and error there some have reported no offset and others between 1 & 2 mm which the majority have just left as is.
Deacs :thumbup
did you measure your distance of the front fork against mine?
Deacs :thumbup
did you measure your distance of the front fork against mine?
Joined Nov 2010
91 Posts | 0+
Hi deacs
I have not measured it yet had to leave it as it was doing my nut in. I just dont know what the problem is I still think it is the bearings but don't know what way to turn now :0( I had to come away from the bike before the hammer slipped lol :0(
Cheers bigkev
Joined Oct 2009
3K Posts | 1+
