This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Who's added twin system then???

andirsv1

andirsv1

Joined Jul 2007
3K Posts | 0+
West Lothian, Scotland
I am taking delivery of a twin system shortly (cheers Hardy!!) and will be fitting it over the next month or so. I have a friend whos sending me a template and fitting instructions (cheers Andy!!) He aslo mentioned though, that there are other little changes to be made for it to fit well (which i didn't realise!!) like left footrest mod, chain guard etc....

So i'm on to ask if anyone who has previously done it could post up all the little "extras" that need doing so i can start to get organised!!!

Thanks alot folks...................:thumbup
 
hi i'm looking at fitting one to my 2002 rsv, would like to know of any mods before i commit to paying out any money, all i know up to now is that a falco set of headers will fit my bike.
I would also like to know of any other mods that need to be made.
 
andirsv said:
I am taking delivery of a twin system shortly (cheers Hardy!!) and will be fitting it over the next month or so. I have a friend whos sending me a template and fitting instructions (cheers Andy!!) He aslo mentioned though, that there are other little changes to be made for it to fit well (which i didn't realise!!) like left footrest mod, chain guard etc....

So i'm on to ask if anyone who has previously done it could post up all the little "extras" that need doing so i can start to get organised!!!

Thanks alot folks...................:thumbup
Click to expand...

Andi

C'mon, I know that a week after you've installed it, it will be back up for sale and exhaust number 17 will be found :thumbup
 
OZMILLE said:
Andi

C'mon, I know that a week after you've installed it, it will be back up for sale and exhaust number 17 will be found :thumbup
Click to expand...




:biggrin:biggrin:biggrin

I think i'll be sticking to this for the Mille buddy!!! Need to find a pair of nice cans for it now!!!!
 
OZMILLE said:
Andi

C'mon, I know that a week after you've installed it, it will be back up for sale and exhaust number 17 will be found :thumbup
Click to expand...
andi shou;ld have kept them all and staged his own dyno shoot out to see which is the best for hp gains:thumbup
 
Andi is the CAN MAN.

canman.img_assist_custom.jpg
 
Boys,

to fit the twin system you need to mod the rear of the bellypan fairing ,Smiffy done mine with a 3 inch grinding wheel and it turned out ok...there is a template about..

.sidestand?....the stand might catch on the link pipe when up on a paddock stand but once your sat on it it should be ok...hooked fitted leo vince twin system and that came with a spacer for the stand.

which just leaves us with the hanger/footrest dilema..if you want footrests you need to find a rare (expensive) left hand footrest that has the built in hanger.. i.e. late edwards rep...(did haga reps have twin exhausts?)...modify a standard one with the Akropovic conversion kit(expensive)/or weld a hanger on to match the right sde or buy a pair of falco footrests like i did...they come up on ebay every now and then, i blagged a set for £15 inc postage.They line up with the frame bolt holes but dont extend back as much as the Mille standard ones so the can straps are nearer the front of the can..and are also more comfortable for the pillion

and no the newer shape rear peg hangers do not fit
 
AREESSMILL said:
LMFAO

ps we are only jealous andi as we arent as rich as you:inlove
Click to expand...

Tim, my man.............not Rich just loads of debt!!!!! I'm a Fireman remember..........the lowest of the low in the opinion of the Goverment (in public sector pay scales anyway!!) TOSSERS!!!
 
redratbike said:
which just leaves us with the hanger/footrest dilema..if you want footrests you need to find a rare (expensive) left hand footrest that has the built in hanger..
Click to expand...

So, if i don't need/want rear footrest hangers, does this remove alot of these hassles dude?? Going to get another high level link pipe made (a copy of my existing one) which does away with the rear footrests!
 
Hi Andi,

I'm liking the sound of your conversion to twin high level, please keep us posted with pics :thumbup . Who are you using for the link pipes ?
 
ive got a twin renagade set up on my 2003 rsvr its under seat type agreat set up the only change i have made was to exstend the back pegs but it was worth it its sounds the dogs
 
mattblack said:
Hi Andi,

I'm liking the sound of your conversion to twin high level, please keep us posted with pics :thumbup . Who are you using for the link pipes ?
Click to expand...
Will do bud, i have a guy up here at Meercat Exhausts who will be doin it. Should look good!
 
stainless da said:
ive got a twin renagade set up on my 2003 rsvr its under seat type agreat set up the only change i have made was to exstend the back pegs but it was worth it its sounds the dogs
Click to expand...
Yeah bud, i've picked up a Renegade set up too! It's for the Tuono!
 
×

Similar threads

RSV_Ecosse
Mille Twin High Mount Renegade Stainless Exhausts
Replies
3
Views
2K
RSV_Ecosse
RSV_Ecosse
T
Gutting the standard Akra twin can systems...!
Replies
1
Views
832
fusebox
fusebox
6
Hi all, new owner and forum member.
Replies
4
Views
1K
redratbike
redratbike
gjbird
Very low mileage 2004 Tuono
Replies
1
Views
1K
Mensedz
M
CZAJ22
Weight saving on the Aprilia RSV4 Factory APRC
Replies
2
Views
3K
CZAJ22
CZAJ22

New Posts