Joined Jan 2009
55 Posts | 0+
London
I've come across a set of 57mm throttle bodies from an '05 factory R. I've heard they can be fitted to a 2000 Mille R but I wondered how much hassle/set up that takes, if they bolt straight in with minimum fuss or if it's a nightmare.
I'm going to fit a renegage kit and I was looking around for some shotgun pipes off the SP if anyone knows anyone that has them in good nick.
Also, does anyone know what the gain is likely to be from the throttle bodies? I'm running a standard except for filter, aprilia titanium race can with the eprom chip, one tooth smaller at the front (i think) - also on the subject of gearing; what is standard sprocket set up and what's the best combination F and R?
I'm going to fit a renegage kit and I was looking around for some shotgun pipes off the SP if anyone knows anyone that has them in good nick.
Also, does anyone know what the gain is likely to be from the throttle bodies? I'm running a standard except for filter, aprilia titanium race can with the eprom chip, one tooth smaller at the front (i think) - also on the subject of gearing; what is standard sprocket set up and what's the best combination F and R?
