stuck on kilometers lost mileage

Should be
press A for 5secs(will start flashing)
Press B once to change to miles
Press A again for 5 secs

swank rsv said:

where is a and b located

Click to expand...

on the dash

RSV1000 Mille/ SL1000 Falco LCD Dash Functions
Resetting the service light

Key on
Press Lap and R for 5 seconds


Switching KM/H to MPH

Key on
Press A about 5 seconds until blinking
Press B to change unit of measurement
Press A for 5 seconds to confirm choice

V max
Uses trip odometer #1 (the odometer displayed during instantaneous speed)

To reset trip odometer #1 press R for 2 seconds
To display V max and distance of trip odometer 1 press B for 2 seconds
To reset V max press R for 2 seconds


AVS (Average Speed)

Uses trip odometer #2
Hold down B for 2 seconds and then press again
AVS is displayed along with distance of trip odometer #2
To reset both AVS and trip odometer #2 press R for 2 seconds

Redline threshold (engine off only)

Press C, release, and press again
Release C when desired RPM is reached

Battery voltage

Press D once

Setting hour

Press D twice
Press LAP until desired hour is reached
Press D to confirm

Setting minutes

Press D three times
Press LAP until desired minutes is reached
Press D to confirm

Setting °C or °F

Press D a fourth time
Press LAP to alternate units


Chronometer (Lap Timer)

V max, AVS, and trip odometer #2 no longer function in this mode
Press LAP and within 0.7 seconds press D to enter chronometer mode
To start timing press LAP and release immediately
To store a lap time press LAP
To display lap times press B
To cycle through the stored laps, press LAP
To reset memory press A and LAP for 2 seconds
To leave chronometer function press LAP and D

Oh dear you have gen2 ,,,hopefully someone more knowledgable will be along in a minute

Ok here it is...press TRIP/V and - buttons together for 15 secs to convert from MPH to KPH....reverse the procedure for KPH to MPH

The only thing I could find is this...not sure how to do it

Enter code 13432 in the diagnostics menu and scroll down to reset service light option.
After entering the above code, this is also where you can change miles/km.