sprag gear

Aprilia Forum

Help Support Aprilia Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
S

sauber

Joined
Oct 1, 2009
Messages
10
hi every 1 im in middle of renewin sprag clutch got parts finally this mornin + wen i came round t start puttin it together i noticed the new sprag gear is slightly bigga than the 1 i took off + only has 61 teeth wer old 1 has 64 the new 1 wont fit in between the otha gears can any 1 advise me on this ??????
 
sauber said:
hi every 1 im in middle of renewin sprag clutch got parts finally this mornin + wen i came round t start puttin it together i noticed the new sprag gear is slightly bigga than the 1 i took off + only has 61 teeth wer old 1 has 64 the new 1 wont fit in between the otha gears can any 1 advise me on this ??????
Click to expand...

Mate, cant be of any help to you, although other will for sure.

However I noticed we dont have a DIY for the sprag replacement. Any chance you can take pics along the way for others to follow in the future??

Cheers Pete :thumbup
 
If the part numbers are correct then it could simply be a case of it being bagged up wrong at the factory, it does happen.

Check out the part numbers first, sounds like a simple case of being supplied the wrong part.

sauber said:
hi every 1 im in middle of renewin sprag clutch got parts finally this mornin + wen i came round t start puttin it together i noticed the new sprag gear is slightly bigga than the 1 i took off + only has 61 teeth wer old 1 has 64 the new 1 wont fit in between the otha gears can any 1 advise me on this ??????
Click to expand...
 
All of the Rotax based engined Aprilia's use a 64 tooth sprag gear.
Your 61 has to be a mistake and from a non rotax based model like a Shiver or something.
 
spoonz said:
All of the Rotax based engined Aprilia's use a 64 tooth sprag gear.
Your 61 has to be a mistake and from a non rotax based model like a Shiver or something.
Click to expand...

Now you mention it Spoonz I'm sure I read that the Pegaso has a slightly different set up, could be that you it's one for them!
 
amb67 said:
Now you mention it Spoonz I'm sure I read that the Pegaso has a slightly different set up, could be that you it's one for them!
Click to expand...

Pegaso is 60 tooth but he could have mis counted i guess and it looks somewhat different as it's solid and not machined out.

Shiver looks very similar to Rsv but not sure what the tooth count is on those.
 

Similar threads

P
RSV 1000 Mille 2003
Replies
3
Views
2K
Hertsrsvr
Hertsrsvr
M
Hi! Soon to be a tuono owner...
Replies
8
Views
1K
hs2300
hs2300
K
My RSV Mille is stuttering 54 plate.
Replies
1
Views
1K
Bristolboy
B
H
A Tuono - A learning curve
Replies
2
Views
1K
Fugly
Fugly
R
Tuono 2003 engine tick, valve tapping noise.
Replies
12
Views
6K
4vr
4vr

New Posts

Back
Top