I have an '04 Tuono R that has a screw adjustor (not a dial) for the rear compression damping. On the sportrider.com page for Tuono suspension settings [http://www.sportrider.com/tech/tires/146_suspension_settings/index.html], the only model that shows a screw adjustment is the RSV Mille R ('05). The settings listed are as follows:
RSV Mille R ('05) 7/05 5 lines showing 1.25 turns out from full stiff 1.5 turns out from full stiff 11mm thread showing 37 clicks out from full stiff 1.75 turns out from full stiff
note: set fork tube height to 16mm, rear ride height one thread showing
[motorcycle issue front preload front rebound damping front comp. damping rear preload rear rebound damping rear comp. damping]
Do these settings apply to my bike?
RSV Mille R ('05) 7/05 5 lines showing 1.25 turns out from full stiff 1.5 turns out from full stiff 11mm thread showing 37 clicks out from full stiff 1.75 turns out from full stiff
note: set fork tube height to 16mm, rear ride height one thread showing
[motorcycle issue front preload front rebound damping front comp. damping rear preload rear rebound damping rear comp. damping]
Do these settings apply to my bike?
