Hi, anyone know the way the colours (grey, blue, green) connect to the sensor (sensor side) on an 02 rsv
3 nibs top to bottom.
Thanks :dowhat
3 nibs top to bottom.
Thanks :dowhat
Joined May 2008
684 Posts | 0+
Falkirk, Scotland
Green=ignition(power)
Grey/white=signal
Orange/blue=negative(ground)
Pretty sure that's it. See Pist'nbroke's Speedo Sensor Repair Sticky thread at the top of the forums, more info in there regarding wiring.
Grey/white=signal
Orange/blue=negative(ground)
Pretty sure that's it. See Pist'nbroke's Speedo Sensor Repair Sticky thread at the top of the forums, more info in there regarding wiring.
Last edited:
Thanks, I tried all ways round and still didn't work. Prob missed one try with grey at the top or something??!!
Joined May 2008
684 Posts | 0+
Falkirk, Scotland
What is it you are trying to do m8?. Have you split the wire to the sensor and are trying to rejoin it?.
No, someone did a cack job on a repair on it and it broke off at the solder on the flippin sensor so wanted to resolder the wires on but I was and still am unsure as to which goes top, 2nd,3rd pin in the sensor
Joined May 2008
684 Posts | 0+
Falkirk, Scotland
Ah, I see.
Okay, does this help?. I've arrowed the "pointy bit" of the sensor connection. "Top" being the pointy bit :-
Okay, does this help?. I've arrowed the "pointy bit" of the sensor connection. "Top" being the pointy bit :-
Are all the sensors/wiring the same ? 1998 - 2009/10
Was damaged and resoldered on the sensor side. Rubber housing was siliconed on. So not where the wires are showing, but the other side
Was damaged and resoldered on the sensor side. Rubber housing was siliconed on. So not where the wires are showing, but the other side
So it broke off of the circled end where it had been soldered so I do not know what goes where?? :dowhat
Joined May 2008
684 Posts | 0+
Falkirk, Scotland
I see what you mean now, not sure to be honest as far as where the wires go at the sensor end. I'll see if I can have a look at mine tomorrow.
And yeah, if memory serves me then the sensors are the same for all model years.
And yeah, if memory serves me then the sensors are the same for all model years.
