This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Speedo, a bit mad !

Joined Oct 2008
46 Posts | 0+
Had the bike out today. After about a hours the speedo went a bit mad... one minute i was doing 0 miles an hour, next i was doing 200 :eek:... I was really doing about seventy.

How can i get this sorted :dunno

Or is just italian electrics :angry
 
Last time this happened to me I noticed the speedo cable (near/on the rear brake caliper where the speed sensor is) had come out of it's little protective fairing where it is routed with the rear brake hose and had burned/melted on the exhaust creating a little short circuit.

I rerouted the cable back into the fairing and all seems well.

Rgds

Mark
 
Dakar, this is a real common problem with the sensor, Its located on thr brake carrier so gets a lot of action, I replaced mine just before selling it. What your seeing are the typical symptoms

It will go completely soon so keep a look out on Gaybay for one.

Take a deep breath cos there pricey mind :D
 
Mine was telling me I was doing 73mph up on the paddock stsnds in my garage:eek:
Phoned the Griff and he said to take the sensor off clean it and refit, did this and touchwood I'm all good:thumbup

:hail Griff
 
Yep, probably the sensor. Mine read erratically before packing up completely. New one sorted it, rrp is about 70 quid but I got a new one for £47 off ebay.
 
you gotta try cleanin it first dude ....thats a free fix!!!


they are a little pricey but readily available dude no worries!!

hope this helps

Griffer!
 
Speedo sensor...There's usually quite a few on ebay..Paid £16 for mine and bought another as a spare for £23 from ebay too...
 
Thanks Guys.

Griff... i might have to make a little trp over to you in he new year..... get the ape serviced and a general look over... for my piece of mind....:thumbup

Why get the second best, when you can go to the GURU :thumbup

Cheers, again... now to find that sensor :)
 
Thanks Guys.

Griff... i might have to make a little trp over to you in he new year..... get the ape serviced and a general look over... for my piece of mind....:thumbup

Why get the second best, when you can go to the GURU :thumbup

Cheers, again... now to find that sensor :)


PS...When you get one, slap a bit of silicone around the rubber boot where the wires enter as in Aprilias wisdom that's not moulded hence letting water in..Had no trouble since doing that with mine 2 years ago..
 

New Posts