crankshaft position sensor to alternator case - 8ftlb/11Nm (use Loctite 243)
sprag clutch case to flywheel - 21.7ftlb/30Nm (use Loctite 648)
flywheel bolt to crankshaft - 94ftlb/130Nm (use Loctite 648)
stator to alternator case - 8ftlb/11Nm (use Loctite 243)
(leave the Loctite to setup for at least a couple of hours before putting the alternator cover on and completeing final assembly)
front axle nut - 59ftlb/80Nm
rear axle nut - 88.5ftlb/120Nm
sprocket carrier nuts - 36.8ftlb/50Nm
front brake calipers - 36.8ftlb/50nm
rear brake caliper - 18.4ftlb/25Nm
sprag clutch case to flywheel - 21.7ftlb/30Nm (use Loctite 648)
flywheel bolt to crankshaft - 94ftlb/130Nm (use Loctite 648)
stator to alternator case - 8ftlb/11Nm (use Loctite 243)
(leave the Loctite to setup for at least a couple of hours before putting the alternator cover on and completeing final assembly)
front axle nut - 59ftlb/80Nm
rear axle nut - 88.5ftlb/120Nm
sprocket carrier nuts - 36.8ftlb/50Nm
front brake calipers - 36.8ftlb/50nm
rear brake caliper - 18.4ftlb/25Nm
Last edited:
........................winging its way to you as we speak
