This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Sidestand Fitment Issue

Joined Jun 2012
101 Posts | 0+
Just fitted my Leo Vince 2-2 to the bike but not a chance the sidestand will not foul the pipework. Obligatory pictures...

Sidestand...
IMAG0053.jpg


Paperwork...
IMAG0054.jpg


Bracket...
IMAG0057.jpg


Pipework...
IMAG0058.jpg


Ideas?
 
What muppet designed that :eek: what you supposed to do, carry a paddock stand round in a rucksack or just lean it up against the nearest wall.
 
I know it can be done...

med_gallery_8508_727_48821.jpg


attachment.php


I think I just need the OEM sidestand? Have no idea what mine is from as it was fitted to the bike when I purchased it.
 
Your side stand looks OEM :confused judging by the pictures it looks as if the stand just hits against the link pipe in the half closed position, it should fully retract into the fairing cut out.
 
Ive fitted a 2-2 arrow system and the stand hits the link pipe but works.

The only issue I had was it grinding the foot round a couple of corners at Donnington.

I'll post a pic on the clearance once they arrive
 
I thought it was obligatory to have a dink in the pipe if you fitted a 2:2 ?

If it is the spigot that is hitting could you not cut it down? If not what about a GSXR stand as they need some adapting anyway you could chop it about but I think they may be shorter
 
It's a gixer stand already with a bit cut off. It's not a big issue as the foot now has ground away where it was catching.
 
Removed that plate as it's not needed, then reversed the spring and added a small spacer. Sidestand now works, added some pics to the relevant section of the bike.
 
×

New Posts