This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

RSV Mille Temp. Problems after Eprom change

Joined Jan 2011
24 Posts | 0+
Hi Folks!
I Recentyl modded my Airbox and changed my Eprom to a Dr. Rossi Eprom (Very pleased with it) (Found a previousliy installed "Tuono my RSV" chip, don't know what make it is)-So my bike is preset to a aftermarket Eprom somehow.
After i've done that, I think my Idle is a bit too hight, at about 1,800 RPM. So my RSV heats up very fast- By that I mean 95°C after 2-3km in the City with partly fluent traffic, cools down after some meters of faster riding, gets hot again as I have to stop at a red light for example. Went out to a short trip, with faster riding RPM ranges up to 9,500RPM, heatet up to 110°C...
Do you guys have any clue what could cure the problem?

Greets from Germany
 
The bike can only run what ever the EPROM that is installed in it & can't be preset to another chip .... These bike don't as most other bikes don't like spending a lot of time running & stopping in town & will heat up very quickly . It may pay to check your thermostat also to see that it is correct temp range which may be a reason it why it is heating up to quickly . Turn your idle screw off abit to drop the rpm back to around 12500rpm
 
×

New Posts