This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Rsv and Tuono Carbon and other bits

Joined Oct 2010
111 Posts | 0+
East Yorkshire UK
Carbon Hooked airbox,will need a couple of screws to hold filter on and a couple of screws for filter base.£110 delivered
DSCF2025_zpsa1bfbd80.jpg

Carbon mudguard,a few small gold spots and a fading where sticker was but all in one piece with no cracks or splits.£35 delivered
DSCF2018_zps3f4816a7.jpg

DSCF2019_zps3348d08a.jpg

Carbon dash cover,one tab damaged but still there and has been glued up and when fitted should be good.£30 delivered
DSCF2020_zps0221144a.jpg

Carbon toe guard,all good.£20 delivered
DSCF2024_zps0798eba8.jpg

Renntec luggage rack Luggage rack for 2003 Mille aor gen 1 Tuono £40 delivered
DSCF2014_zps4747ff6b.jpg

Renntec Grab rail 2003 Mille aor gen 1 Tuono £30 delivered
DSCF2015_zps0145aa23.jpg

Mille haynes manual,got a bit moisture damp in garage all pages fine just cover a little bent.£10 delivered
DSCF2016_zpseaf71546.jpg

Hel rear brake line and fittings in black,new.£15 delivered
DSCF2026_zpsf5b8805d.jpg

53mm clipons as per picture with scratches etc but no damage,took them off when i fitted Falco bars.£25 deliverd
DSCF2027_zpsdb5ac959.jpg

Sidestand with switch and spring.£15 delivered
DSCF2031_zpsb0055fa4.jpg

Pair of indicators with plugs.£15 delivered
DSCF2029_zps75166b77.jpg

Pair of indicators with plugs chopped off.£10 delivered
DSCF2030_zps6f5db61c.jpg

Pair of heel plates,scuffed but straight with bolts.£8 delivered
DSCF2032_zpsb014d69c.jpg

Headlight cover for 2003 Mille and gen 1 Tuono.£10 delivered
DSCF2033_zps9cdcd93c.jpg

Supersprox 42t rear sprocket,new,never fitted.£25 delivered
DSCF2028_zps74a98ebe.jpg
 
Toe guard,indicators with plugs,rack,headlight cover and mudguard are all spoken for now.
 
Toe guard,indicators with plugs,rack,headlight cover and mudguard,sprocket and rear brake line are all spoken for now.
 
Are there some screws missing on the airbox? What size ? I assume they are nothing special and can be easily replaced? Is this the open type airbox? Does it need a seal for the bottom of the tank?

Sorry for the noobie questions, regards in advance
 
The screw for the base,you can use the one from your airbox,thats what i did and the filter ones are just two normal ones,the must be in the garage somewhere and will have another look to find them.
The airbox does not need a seal the plate screws onto throttle bodies same as your airbox then filter onto that.
easy peasy,20 minutes to swap.
 
Oh I see I understand thanks sorry if I was being a bit thick, I wil have the airbox and the Haynes manual please mate, PM your details.
I'm away at the moment but back home at the weekend so can sort payment early next week if that's ok ?
 
×

New Posts