Hi guys, I've removed a Meta alarm from my Mille after I think I fried it connecting a car battery charger to the bike without disconnecting the battery.
Before I removed the alarm all I got was a click from the starter solenoid and no fuel pump priming noise.
After removing the alarm and sorting most of the wires, I've been left with two blue/grey wires which go into a white plug connector and were connected to black alarm wires on the other side of the plug. There doesn't seem to be any wires to connect them back to. I've tested the wires and get 12v. I also tested resistance and get over 5Mohms. Any ideas would be gratefully received. Cheers
Before I removed the alarm all I got was a click from the starter solenoid and no fuel pump priming noise.
After removing the alarm and sorting most of the wires, I've been left with two blue/grey wires which go into a white plug connector and were connected to black alarm wires on the other side of the plug. There doesn't seem to be any wires to connect them back to. I've tested the wires and get 12v. I also tested resistance and get over 5Mohms. Any ideas would be gratefully received. Cheers
