This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Rear suspension connecting rod snapped!

Joined May 2011
5 Posts | 0+
Pulled my bike out of the garage today and it just collapsed at the rear!! :mad:

Further inspection found it was the rear suspension connecting rod had split down the length.

Anyone else had this?

Lucky for me it wasn't mid corner!!!
 
Pic please matey so we know which parts gone if its the side plates get some solid one's shipped from AF1 there the best i have a set on mine one of the first things i changed


There you go guy's:

photo.jpg
 
As you can see it's the dog bone section that is broken.

I have ordered a replacement along with the bearings, should I replaced the bearings in the shock and the bearing on the frame too? Are the original plates ok?

Gawd it's getting expensive lol!
 
As you can see it's the dog bone section that is broken.

I have ordered a replacement along with the bearings, should I replaced the bearings in the shock and the bearing on the frame too? Are the original plates ok?

Gawd it's getting expensive lol!

No bearings in the shock chap just bushes and they will be fine.

Replace the link plates as mentioned also if i were you
 
×

New Posts