Neutral Light staying on

GottaHurt · Oct 12, 2009

I changed the clutch oil jet and took out the wrong bolt at first .It pissed oil for a bit .Started the bike today and it seemed a bit noisy for a while , but the oil light didn't come on ..After a while riding , the neutral light came on and is staying on ,, Any ideas ?

amb67 · Oct 12, 2009

Have you accidentally caught your neutral switch wire and shorted it out or even dislodged it and it's shorting on the casing?

It's just an inch or so to the right of the oil jet bolt. :thumbup

GottaHurt said:
I changed the clutch oil jet and took out the wrong bolt at first .It pissed oil for a bit .Started the bike today and it seemed a bit noisy for a while , but the oil light didn't come on ..After a while riding , the neutral light came on and is staying on ,, Any ideas ?

GottaHurt · Oct 12, 2009

Amb , thanks for the info , i'll check it out ,.. But it was ok at first when I rode it for a while ..

GottaHurt · Oct 12, 2009

Seems ok . Any other ideas ?:dunno

GottaHurt · Oct 13, 2009

Might not have any bearing on this , but I also changed the front sprocket ...

GottaHurt · Oct 13, 2009

Anyone ? Heeeeeelp

amb67 · Oct 13, 2009

OK, if you disconnect the neutral switch wire and tape it up does the neutral lamp still illuminate?

If it does then you have what's known as back feeding, usually caused by an electrical fault elsewhere.

Let me know how you get on!

Search

Search

Neutral Light staying on

GottaHurt

amb67

GottaHurt

GottaHurt

GottaHurt

GottaHurt

amb67

Similar threads

New Posts