This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Need a PC3 Map

G

Grodin

Joined Jan 2010
23 Posts | 0+
Finland
Heya!

Been looking for dyno tuned PC3 maps to make the bike run well, but the dynojet website maps are quite far off..

Does anyone have a map for 2003 RSV with full exhaust, map 2 and modded airbox, smaller details dont matter if anyone has something similiar.

Cheers!
 
Have plenty but each bike is different & I would suggest you look at getting a custom Dual map done to get the best out of what you have ... Those that have spent hunderd's on getting their bike custom mapped want really want to just give it to others for Free .. There are afew maps on the powercomander that I used while developing my 03R that work well , will check my files & find one that you can try ...
 
Sensei said:
Have plenty but each bike is different & I would suggest you look at getting a custom Dual map done to get the best out of what you have ... Those that have spent hunderd's on getting their bike custom mapped want really want to just give it to others for Free .. There are afew maps on the powercomander that I used while developing my 03R that work well , will check my files & find one that you can try ...
Click to expand...

Yes i'm about to get it mapped but theres no point until i get the TBs synced and who knows what else, just want to get it run better until i can get it mapped :)

First i tried "M902-507 Full Power European Model with Arrow full exhaust (twin mufflers on one side), de-restricted airbox with stock eprom" and it ran like crap, and now im on "M902-514 02-03 European Mille R Model with Startwin 2:2 exhaust, stock eprom and stock or aftermarket air filter" and its running much better.

Its really wierd they dont mention if their maps are on map 1 or map 2, they say on tuono/falco maps..

:inlove

125611397.jpg
 
Last edited:
If they say Pin 16 disconnected then it is Map 2 ... neither the 507 or 514 has the second map open . You do know that when loading a map you will still have retune the bike to suit the new sets ?
 
Yes but none of the maps that have matching eprom/mods say pin 16 connected for rsv.

Obviously i need to retune the bike because each one is different, but a tuned map for similiar mods is very close to optimal compared to a wrong map :thumbup

Edit:

Oops, it looks like i actually can use the maps that also state RP58 eprom, thats what 01-03 bikes come to begin with!? So i could try one of these:

M902-520 02 European German Model, Akrapovic 2-2 Exhaust with open silencers, derestricted airbox with Intake air rubber from 2000 model, RP 58 eprom and Pin16 disconnected
M902-513 Full Power European Model with Shark ECE approved double slip-ons, RP58 eprom, open air-box with intake rubber from 1999 model and pin 16 disconnected at ECU
 
Last edited:
"M902-520 02 European German Model, Akrapovic 2-2 Exhaust with open silencers, derestricted airbox with Intake air rubber from 2000 model, RP 58 eprom and Pin16 disconnected"

This one works wonderfully, got rid of the flatspot @ ~5k rpm :inlove

Still looking for a map with a better match..
 
×

Similar threads

CHAPLAIN1
2002 Aprilia Mille R track/street many upgrades!! SOCAL
Replies
4
Views
1K
CHAPLAIN1
CHAPLAIN1
Gray
Tuono 1000 Magnet Grey 2003 - 12,000mls
Replies
7
Views
1K
Paul D
Paul D
A
Power commander 3
Replies
5
Views
2K
jetmek21
J
B
Aprilia RSVR for sale
Replies
0
Views
955
butchersdog
B
C
Power Commander III USB
Replies
5
Views
1K
turbopresh
T

New Posts