This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

More Dr Rossi help

O

OZMILLE

Well, its done............

Fitted the Dr Rossi chip today, Co trimmers at 12 oçlock with the bypass screws done.........me thinks :dunno

NOW, firstly I am not the type to review something and just go along with the "Geez, great product, added at least 15hp..bla,bla,bla

So I can tell you honestly that after fitting the Rossi chip I didnt notice any extra HP gain...........BUT I am still happy :eek:

What I could tell is that the motor "SEEMED" to pull MUCH MUCH smoother and quicker (could be the new 16/44 to) off the bottom all the way to redline, and it just seemed to be more effortless from the motor, no signs of stress at all :thumbup

Now for the help...............

1, The chip I took out had the numbers A63, anyone know what that is??

2, MOST IMPORTANT, when adjusting the BYPASS screws for the front/rear this is my question.

Which is front, I have assumed obviously the screw closest to the front wheel, can anyone please clarify??????????

Cheers Pete
 
Yes front bleed is at front of bike , mine wouldn't run clean set at the figures DR-Rossi suggested so put them to where bike was originally & runs very hard . Your chip I believe is a standard eprom for your particular country
 
Last edited:
Yes front bleed is at front of bike , mine wouldn't run clean set at the figures DR-Rossi suggested so put them to where bike was originally & runs very hard . Your chip I believe is a standard eprom for your particular country

Thanks Sensei

Glad to see I guessed well, I set them to 2 1/2 out from front and 1 1/4 at the rear. My original was 1 1/2 out at the front and 1 at the rear.

After what you have put down is it worth me trying the originals to see if it makes any difference???? Not really sure what these bypasses do though.

Cheers Pete
 
They regulate the amount of air/fuel ratio & the Trim pots regulate the Injector pulses timing . Slower pulse leaner / faster richer
 
They regulate the amount of air/fuel ratio & the Trim pots regulate the Injector pulses timing . Slower pulse leaner / faster richer

Cheers Sensei

So should I try the original settings as you did, or will I not know if that will
benefit...............:dunno
 

New Posts