This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mille indicator hell!!!

Joined Oct 2009
10 Posts | 0+
hi everyone ive fitted new led indicators and led relay but all four indicators flash weher turning left or right on switch any help would b appreciated thanks
 
Off the top my head I'm sure I read somewhere that you have to do a mod the the back of the dash plug like fitting some diodes or sommat as the indicators are wired to single dash warning light so both left/right indicator circuits are tied together thats why all ur lights are flashing together........ I will have a quick search and link it in for ya if I find it.............

I've only put led's on the rear of mine so far and had to change the front bulbs to 23 watt jobbies to keep the flash rate the same

Here it is m8 and this is what I'm gonna do to mine
http://rsvzone.com/forums/showthread.php?11519-LED-Indicator-Wiring-Dash-Modification

I have heard that some other people have had your problem and I'm sure that the diode route is the way to go...........just hope u got a soldering iron bud
 
Last edited:
fitted a set of oxford saturn leds front and back which came with the resisters, but all lights were slow or did not flash at all, so git this led relay and all sorted now and its cheap as chips
 
sorry, tried putting the link in but no worky, its from ebay and costs a fiver. there are loads of them advertised
 
×

New Posts