Hi guys there was a thread on here a few months ago on how to get LEDs to work on a RSV i have done a search but can't find it can someone point me in the right direction
LED indicators
- Thread starter Gravelrash
- Start date
-
- Tags
- indicators led
Joined Oct 2007
71 Posts | 0+
I had to use 4 of these from ebay http://cgi.ebay.co.uk/LED-Indicator...14&_trkparms=72:1683|66:2|65:12|39:1|240:1318
As an eBay Associate we earn from qualifying purchases.
Joined Feb 2009
11 Posts | 0+
South Coast
I bought and fitted these http://www.demon-tweeks.co.uk/products/ProductDetail.asp?cls=MCYCLE&pcode=MTXTC1 at the weekend. Made of metal and good quality finish. Came supplied with inline resistors so flash rate is fine. Bought mine from P&H in Crawley, so cannot be sure the resistors are standard (although I suspect so).
Hope this helps.
Hope this helps.
Thanks for the replys the problem i have at the moment is that they just stay on and don't flash
Joined Feb 2009
11 Posts | 0+
South Coast
I suspect it is a relay / resistor problem...but I'm no expert.
Perhap a replacement relay (motrax do a universal one)?
Perhap a replacement relay (motrax do a universal one)?
What indicators do you have on at present?
LED's front and rear or LED's Front only or LED's Rear only.
If you do all 4 LED's then you need to do the dash mod too.
Need to know your set up so I can tell what's wrong.
OK.
You'll need either load resistors on all LED indicators or fit an LED relay.
Personally the LED relay is the way to go, easily bought off Ebay for under £10.
You'll also need to do the dash mod on the back of the dash plug, see my previous post for instrcutions.
If you get stuck PM me and I'll help you out.
Joined Mar 2008
3K Posts | 0+
Lincolnshire
