J
Jussi
Guest
To check the valve clearances without removing the tank?
Any other things i need to consider?
Cheers
Any other things i need to consider?
Cheers
Help Support Aprilia Forum:
M
mutts nuts
Guest
hi matey
don`t take this the wrong way but ............
if you are not sure maybe get someone who knows to do it for ya ,or a dealer
you would not want do get this wrong :eatcorn
don`t take this the wrong way but ............
if you are not sure maybe get someone who knows to do it for ya ,or a dealer
you would not want do get this wrong :eatcorn
A
amb67
Guest
Take the tank off as it gives you so much more room and visibility.
If you're worried about taking the tank off then valve clearances are a big no no.
If you're worried about taking the tank off then valve clearances are a big no no.
J
Jussi
Guest
No probs i am just lazy...
Mate of mine is coming over and he is Wiz on engines from marine Diesel to motor bike. I was just wondering that could it be done... saves some time if it can be done. On my previous tank off coolers off etc.
Mate of mine is coming over and he is Wiz on engines from marine Diesel to motor bike. I was just wondering that could it be done... saves some time if it can be done. On my previous tank off coolers off etc.
J
Jussi
Guest
So i thought since you have acess to the hex holding the cover.
Front cylinder requires more to do than the rear...
Front cylinder requires more to do than the rear...
- Joined
- Jul 5, 2007
- Messages
- 2,585
- Location
- london
not possible !tank needs to be removed:thumbup
- Joined
- Jul 1, 2007
- Messages
- 2,980
- Location
- kent
Don't listen to him mate,he knows nothin..:doug
J
Jussi
Guest
Well tank was removed. Valves were within the tolerance one intake was at the 0.12mm limit others were more in the middle of the tolerances.
Broke the bloody quick lock thing on return fuel hose and i lack some washers to get the fuel hose and the tank fitted back.
Otherwise not a big deal and i was happy to note that the cams were as new like all the rest that i was able to see underneath the cam covers.
Broke the bloody quick lock thing on return fuel hose and i lack some washers to get the fuel hose and the tank fitted back.
Otherwise not a big deal and i was happy to note that the cams were as new like all the rest that i was able to see underneath the cam covers.
