Joined Nov 2009
21 Posts | 0+
Connecticut
Hey all. I have an 04 RSVR. I've had no problems with it that weren't obvious fixes until yesterday. I started it up, let it warm up. Then I went down the street and came to a stop sign. The bike stalled out, which happens from time to time shortly after starting it with the current tune on my power commander. I started it up but now the bike was in limp mode with the oil light on. No triangle or EFI warning. I turned the key off then back on and started her up and all was well again. I immediately took her home. My oil level was fine, and I checked the connection on the oil pressure sensor and it was clean and tight. I also tried to read any codes that may have popped up but there was nothing in the memory. I was able to replicate the problem as well - bike stalls at a stop and then goes into limp mode upon starting, but clears with key off/on. I just ordered a new oil pressure sensor and expect it later this week with my luck it won't fix the issue. Does any one have any other ideas that might help me out?
