:thumbupHi Nelly
I have just copied this from another site, I think it is for same bike :confused, if not, I will check my manual when I get home and change if nessessary.
There are two functions available that display the clock, as follows:
"HH:MM:SS" display
"MM:SS" and rpm display
SETTING THE CLOCK
To set the clock, one of the two CLK modes must be displayed.
Press and hold SCROLL for 7 seconds. The first set of digits begins flashing.
When digits are flashing (either HH or MM or SS) you have only 4 seconds to alter the value before the display moves on and the next set of digits begin flashing.
Change the value shown by the flashing digits by depressing SCROLL once to increase the value by one. Hold down SCROLL to cause the digits to more quickly count upward. For hours, the display reads either 00-23 (for 24-hour format) or 01-12 with "am" or "pm" (for 12-hour format). Make sure you set it accordingly.
When the correct value is reached, simply do nothing for 4 seconds. The value you have set stays, and the blinking moves on to the next set of digits. Alter each set of digits by the same procedure.
When all digits have stopped blinking, the new time (if you changed it) is set.
12-HOUR and 24-HOUR FORMATS
If the unit of measurement is set to Mph, the time is displayed in 12-hour format with "am" or "pm" appearing. If the unit of measurement is set to km/h, the time is displayed in 24-hour format. There is no means to alter this.
