Help with stand

Aprilia Forum

Help Support Aprilia Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jun 29, 2016
Messages
14
Location
Edinburgh
Hi all. Bought my first Tuono last weekend. Can anyone advise an eBay number for the US spec stand or where to get one as the stand is rubbish. My bike is a '57 plate' registered January 2008.

Any help greatly appreciated

Scott
 
Just go on the usa ebay.... plenty to choose from

08 Aprilia Tuono Factory Kickstand w Bracket Only 1K Miles 255 RSV Kick Stand | eBay


Search for aprilia kick stand !


:)

How does that differ from the original bike stand?

I read on this forum that the better stands are slightly longer, and have a bend, to set the leg out further from the bike... Hence more stable.

Just having a longer (straight) stand will make the bike more upright and less stable. Having the same length straight stand will make no difference at all.
- Am I missing something? :crazy

PS: Be aware the shipping charge for that US stand is US$ 73.
 
As an eBay Associate we earn from qualifying purchases.
Thanks guys I will check it out.

Also done a wee bit more digging and have a Honda blade part no. That is ment to be direct replacement so may pop into honda today and see about cost of that one.
 
Thanks Felix.
- I can now now see said 'bend' is in the fixing plate, not the leg. Good info, thanks!
 
AP8146732 seems to be part no. For 2007 tuono can anyone shed light as this is stressing me out with the right one to get.
 
AP8146732 seems to be part no. For 2007 tuono can anyone shed light as this is stressing me out with the right one to get.

Forget the American one mucker, far cheaper ways of sorting it.

Fireblade or blackbird ones do the job.

The blade is a straight swop and the b/bird only needs a wee hole opened out.
 
Was in at local honda dealer today and honda are out of stock of the blade stand until September supposedly Aldo,
 
Have you tried any bike breakers mucker.
 
Not yet buddy. I may try that, I have found the US part I need just the shipping is a proper kick in the....

Does the blade stand work just as well as the oem US stand tho.
 
It does Imo mucker.

The us one is more robust, it has to be able to take rider and pillion with the stand deployed.

As yer know some of them mericans can be heavy dudes.

It's the angle of lean that gives yet the stability.
 
I will have a look for a breakers then and see if they have any. Just anything that will make it more secure is fine by me. Cheers for all the help mate.
 
Cheers for all the advice, much appreciated. Bit the bullet and bought a new US spec stand after a few phonecalls to apriliagenuinespares.co.uk

Cheers again for all the help.
 

New Posts

Back
Top