Hi all
In anticipation of better weather i've been fiddling!....got the AR GP2R pipe on ....awesome as I thought!......struggling with the MRA screen though, got the old one off and now stuck with a load of spacers and washers, anyone got any advice or tell me where i can view a video?...nothing on you tube[/QUOTE
Hi mate. You are right the MRA screen is a pain in the arse as the instructions are pretty useless. I eventually fitted it by trial and error. The two long plastic spacers do screw into the back of the clocks and they also hold the two U shaped metal fixings which hold the rubber threaded fixing into which the screen screws hold the screen on. The U shaped metal parts have to be in the right position to match the screen when it is offered up and I found this the real fiddly bit. There is also a thinner rubber washer which is supposed to sit under the bottom of the screen through which the 3rd fixing screw goes, this prevents it from vibrating against the fairing, however, I found the screw was not long enough so I just used a small piece of double sided tape to keep the screen from touching the fairing. I am not sure if the above helps, it took me a couple of hours of fiddling to get the screen how I wanted it and fixed securely, I am sure others will say it is a doddle. It was easier to fit my Leo Vince exhaust.
