This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Help I'm a Homer

Joined Jul 2008
18 Posts | 0+
East Sussex England
Hi All, I'm new to the Forum and need some help
I guess I'm being a bit thick, however, just spent last couple of weeks blasting thru SW France. Fantastic, No Gendarmes, No cameras and great empty roads!!:thumbup.
Anyway can someone tell me how do I change my clocks to read KPH and not MPH (it was sometimes a bit tricky and doing 110MPH in a 110 KPH zone I'm told is not on!)
Any help would be great as I can't find it in the manual.
Cheers
Ratsville
 
What is wrong with ignoring the speed limits :laugh

We did a similar trip through the villages we were very sensible but on the open road then miles= kph


Does the manual not tell you how it is done :O
 
Resetting the service light
Key on
Press Lap and R for 5 seconds
Switching KM/H to MPH
Key on
Press A about 5 seconds until blinking
Press B to change unit of measurement
Press A for 5 seconds to confirm choice
V max
Uses trip odometer #1 (the odometer displayed during instantaneous speed)
To reset trip odometer #1 press R for 2 seconds
To display V max and distance of trip odometer 1 press B for 2 seconds
To reset V max press R for 2 seconds
AVS (Average Speed)
Uses trip odometer #2
Hold down B for 2 seconds and then press again
AVS is displayed along with distance of trip odometer #2
To reset both AVS and trip odometer #2 press R for 2 seconds
Redline threshold (engine off only)
Press C, release, and press again
Release C when desired RPM is reached
Battery voltage
Press D once
Setting hour
Press D twice
Press LAP until desired hour is reached
Press D to confirm
Setting minutes
Press D three times
Press LAP until desired minutes is reached
Press D to confirm
Setting °C or °F
Press D a fourth time
Press LAP to alternate units
Chronometer (Lap Timer)
V max, AVS, and trip odometer #2 no longer function in this mode
Press LAP and within 0.7 seconds press D to enter chronometer mode
To start timing press LAP and release immediately
To store a lap time press LAP
To display lap times press B
To cycle through the stored laps, press LAP
To reset memory press A and LAP for 2 seconds
To leave chronometer function press LAP and D
 
Resetting the service light
Key on
Press Lap and R for 5 seconds
Switching KM/H to MPH
Key on
Press A about 5 seconds until blinking
Press B to change unit of measurement
Press A for 5 seconds to confirm choice
V max
Uses trip odometer #1 (the odometer displayed during instantaneous speed)
To reset trip odometer #1 press R for 2 seconds
To display V max and distance of trip odometer 1 press B for 2 seconds
To reset V max press R for 2 seconds
AVS (Average Speed)
Uses trip odometer #2
Hold down B for 2 seconds and then press again
AVS is displayed along with distance of trip odometer #2
To reset both AVS and trip odometer #2 press R for 2 seconds
Redline threshold (engine off only)
Press C, release, and press again
Release C when desired RPM is reached
Battery voltage
Press D once
Setting hour
Press D twice
Press LAP until desired hour is reached
Press D to confirm
Setting minutes
Press D three times
Press LAP until desired minutes is reached
Press D to confirm
Setting °C or °F
Press D a fourth time
Press LAP to alternate units
Chronometer (Lap Timer)
V max, AVS, and trip odometer #2 no longer function in this mode
Press LAP and within 0.7 seconds press D to enter chronometer mode
To start timing press LAP and release immediately
To store a lap time press LAP
To display lap times press B
To cycle through the stored laps, press LAP
To reset memory press A and LAP for 2 seconds
To leave chronometer function press LAP and D

HI Doug. That may work for the '02 - '05 Tuono, but not for the '06 - '08 models.

Here's a fix by JodyH from the AF1 forum:

I just went out and checked my '07, it is under the "Diagnoses" menu.
Select "Diagnoses" then enter 13432 as the code
Then scroll down to kph/mph


Dave
 

New Posts