Joined Jan 2010
4 Posts | 0+
Sydney Australia
After good read on this sight last night I thought I would spend the arvo in the shed. Changed the front sprocket to a 16 tooth (17 teeth was standard fit here in Oz). Took it for a lap of the block and it is sweet, more punch in one ,two and three . Power wheelies in one and two so happy with that. I then got a mate to break out the soldering iron and the heat shrink and did the brown connector mod. I also got rid of the white plug that goes to the voltage regulator so should be safe there. Next on the list was the left hand switch gear which I swapped for an early model pod with the indicator in the right position (no more rendom horn beeps). Finally because I had the clutch slave cylinder out to chnage the sprocket I bled the clutch. I want to say thanks heaps to all the people who post great info on this sight I got all the ideas straight from this sight and the laptop was my guide through the whole service. Bike is spot on so once again thanks lads.
