This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Factory Suspension settings

Joined Jan 2009
11 Posts | 0+
Worcester, England
:dunnoCan someone help please as i`m after the stock settings for the Factory model as the manual only seems to cover the r model, plus what are the recommended tyre pressures for the bike in psi.
 
Tires front 34.8 rear 39.15 PSI.

Ohlins fork preload eight turns which puts it in the middle of the range. Don't know about rebound or compression but would make sense to put them also in the middle of the range then adjust from there.

Hope that helps.
 
G'day Factory01,
Standard settings
Here are the settings for 2007 factory from the "use &maintenance book".p67
spec Desc./ Quantity
Compression adjustment,screw(2) Open(**) 12 clicks from fully closed(*)
Rebound adjust. ring nut Open(**) 20 clicks from fully closed(*)
Length of (preloaded) spring 145mm
Shock absorber centre to centre distance 313+- 1.5mm
Racing settings
Shock absorber centre to centre distance from 310 to 316mm
Length of (preloaded) spring 147mm
Rebound adjust. ring nut Open(**) 13-16 clicks from fully closed (*)
(*) clockwise (**) anti clockwise
Hope these are the same for your year/model
Perry:cheers
 

New Posts