Hi muckers can anyone tell me if a 2009 tuono r would still have that piece of tat still fitted to the genorator wires, mines only done 4000 mls dont want the melt down to happen . Cheers
Dreaded brown connecter
- Thread starter TRAMPSVEST
- Start date
Joined Aug 2009
5K Posts | 62+
Sunderland
Should be ok, think it was earlier models that had the problem.
KB will no doubt confirm this, he is the brains on here.
KB will no doubt confirm this, he is the brains on here.
Joined Jul 2008
1K Posts | 26+
Yes, definitely.
Pull it apart, slam some dielectric grease in there, put it back together, and check again in 12 months.
Joined Oct 2010
2K Posts | 20+
The Fens.
General rule of thumb is,......if it looks ok,....
.....leave the ****** alone!
Seriously tho,...a 2009 bike should have the updated alternator rotor fitted,so the connectors and reg/rec get an easier time.Mines a 2010 bike,(built 2009),...I checked the connector once,...smeared some grease in there,^^as above^^,...and not looked at it since.
.....leave the ****** alone!
Seriously tho,...a 2009 bike should have the updated alternator rotor fitted,so the connectors and reg/rec get an easier time.Mines a 2010 bike,(built 2009),...I checked the connector once,...smeared some grease in there,^^as above^^,...and not looked at it since.
Joined Aug 2013
5 Posts | 0+
berea Ohio
Mine looked perfect at 7200 miles but its been well documented over the years that they can go bad so I spent twelve minutes of my life splicing three wires together to never think about it again.
