Guides Common Dash/Computer Questions

The following may work for the '02 - '05 Tuono, but not for the '06 - '08 models.

Here's a fix by JodyH from the AF1 forum:

I just went out and checked my '07, it is under the "Diagnoses" menu.
Select "Diagnoses" then enter 13432 as the code
Then scroll down to kph/mph

Click to expand...

Dave

Resetting the service light
Key on
Press Lap and R for 5 seconds
Switching KM/H to MPH
Key on
Press A about 5 seconds until blinking
Press B to change unit of measurement
Press A for 5 seconds to confirm choice

for the 2006-2008 model years try under the "Diagnoses" menu.
Select "Diagnoses" then enter 13432 as the code
Then scroll down to kph/mp

V max
Uses trip odometer #1 (the odometer displayed during instantaneous speed)
To reset trip odometer #1 press R for 2 seconds
To display V max and distance of trip odometer 1 press B for 2 seconds
To reset V max press R for 2 seconds
AVS (Average Speed)
Uses trip odometer #2
Hold down B for 2 seconds and then press again
AVS is displayed along with distance of trip odometer #2
To reset both AVS and trip odometer #2 press R for 2 seconds
Redline threshold (engine off only)
Press C, release, and press again
Release C when desired RPM is reached
Battery voltage
Press D once
Setting hour
Press D twice
Press LAP until desired hour is reached
Press D to confirm
Setting minutes
Press D three times
Press LAP until desired minutes is reached
Press D to confirm
Setting °C or °F
Press D a fourth time
Press LAP to alternate units
Chronometer (Lap Timer)
V max, AVS, and trip odometer #2 no longer function in this mode
Press LAP and within 0.7 seconds press D to enter chronometer mode
To start timing press LAP and release immediately
To store a lap time press LAP
To display lap times press B
To cycle through the stored laps, press LAP
To reset memory press A and LAP for 2 seconds
To leave chronometer function press LAP and D

Oh just a note for UK Tuono owners.... some dealers have got rather upset cos we know the Diag code... sos best dont tell 'em...

Hi everyone, I was out on my '02 Tuono and I managed stall it, I restarted it on the button but the speedo went to KPH and the clock and rev max all reverted back to default, I set everything back to how it should be and while the speedo reads MPH it has stopped working, any ideas.

I found this somewhere on the net and believe it's the 06-08 models.

Dash/LCD Display
Resetting the service light
Key on
Press Lap and R for 5 seconds
Switching KM/H to MPH
Key on
Press A about 5 seconds until blinking
Press B to change unit of measurement
Press A for 5 seconds to confirm choice
V max
Uses trip odometer #1 (the odometer displayed during instantaneous speed)
To reset trip odometer #1 press R for 2 seconds
To display V max and distance of trip odometer 1 press B for 2 seconds
To reset V max press R for 2 seconds
AVS (Average Speed)
Uses trip odometer #2
Hold down B for 2 seconds and then press again
AVS is displayed along with distance of trip odometer #2
To reset both AVS and trip odometer #2 press R for 2 seconds
Redline threshold (engine off only)
Press C, release, and press again
Release C when desired RPM is reached
Battery voltage
Press D once
Setting hour
Press D twice
Press LAP until desired hour is reached
Press D to confirm
Setting minutes
Press D three times
Press LAP until desired minutes is reached
Press D to confirm
Setting °C or °F
Press D a fourth time
Press LAP to alternate units
Chronometer (Lap Timer)
V max, AVS, and trip odometer #2 no longer function in this mode
Press LAP and within 0.7 seconds press D to enter chronometer mode
To start timing press LAP and release immediately
To store a lap time press LAP
To display lap times press B
To cycle through the stored laps, press LAP
To reset memory press A and LAP for 2 seconds
To leave chronometer function press LAP and D

If your after a 06-08 maintenance book send me your email and I'll send you back a pdf version, complete

Awesome lads....used the lap timer function at Donington on Monday and found out how to use it from here.

My mates G'S doesn't do this....lol