Hi,
I've put my Mille on permanent track bike duties, so do not need the top yoke kit that was on it. The kit was on a '99, so should fit the 99-03 RSVs.
It is a topyokes.com kit which cost me £280, and has been rock solid for the year it's been on the bike. All spacers are included, it comes with silver renthal bars which have not been drilled (I filed the nub off the RH switchgear instead so I could position it exactly), and the longer clutch and brake lines. All you need to buy is the crush washers needed for the lines, and a double banjo bolt for the front brake master cylinder if you do not have one already.
It's in very good condition, no marks except for around the stem nut and thottle, which can't be seen when everything is bolted together. The lines are clear coated Hel lines.
The kit is for showa forks, I think you could use a 1mm spacer to get them to fit the Ohlins forks but please check. It comes with the additional spacer to lift the bars over the higher showa adjusters. If you have a steering damper, you may need to buy longer brake lines - they are the right length without a damper, but they felt too tight with one. You will have to cut the nose cone right down to the front subframe mirror mounting points to get the levers to not catch, if you want to chop less off the nose cone you'll need to have some bigger lock stops made for the bottom yoke.
Pics:
£140 delivered (a bit more for highlands, islands etc.) :thumbup
I've put my Mille on permanent track bike duties, so do not need the top yoke kit that was on it. The kit was on a '99, so should fit the 99-03 RSVs.
It is a topyokes.com kit which cost me £280, and has been rock solid for the year it's been on the bike. All spacers are included, it comes with silver renthal bars which have not been drilled (I filed the nub off the RH switchgear instead so I could position it exactly), and the longer clutch and brake lines. All you need to buy is the crush washers needed for the lines, and a double banjo bolt for the front brake master cylinder if you do not have one already.
It's in very good condition, no marks except for around the stem nut and thottle, which can't be seen when everything is bolted together. The lines are clear coated Hel lines.
The kit is for showa forks, I think you could use a 1mm spacer to get them to fit the Ohlins forks but please check. It comes with the additional spacer to lift the bars over the higher showa adjusters. If you have a steering damper, you may need to buy longer brake lines - they are the right length without a damper, but they felt too tight with one. You will have to cut the nose cone right down to the front subframe mirror mounting points to get the levers to not catch, if you want to chop less off the nose cone you'll need to have some bigger lock stops made for the bottom yoke.
Pics:
£140 delivered (a bit more for highlands, islands etc.) :thumbup
Last edited:
