Hi guy s got an 2011 rsv4 the brake light has started staying any idea s on how to check wot the problem may be or how to rectify it ??
Joined Oct 2010
72 Posts | 0+
Gateshead
This happened on my Gen 1 Mille and my mates Gen 1 Tuon, as it looks the same setup on the RSV4. Check the brake micro switch cable which is attached to the rear brake pedal. It's a black cable with a galvanised nut end. **** gets past the actuator pin seals and the rear light stays on.
If you look at the 3rd picture here, you will see it to the left of the engine casing going down to the brake pedal and in the next picture it is left dangling over the swing arm.
If you look at the 3rd picture here, you will see it to the left of the engine casing going down to the brake pedal and in the next picture it is left dangling over the swing arm.
Cheers for that .. I ended up finding the problem it was the switch just under the front lever that was the problem thank s again though
so, my e-brake light wont go off. i dont think its a big deal, its just really annoying. i know the e-brake isnt engaged but the light just stays on. any ideas?
Similar threads
