pipe loose on throttle bodys

Aprilia Forum

Help Support Aprilia Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Sep 26, 2020
Messages
5
Location
Portsmouth
3.jpgHi all, just asking the question as at the time Ive been removing the air filter box and throttle bodys to check what problem ive been having with hesitancy below 4000 rpm. (bike backfires on start up and stutters occasionally when pulling away) wanted to check my injectors and anything else that could cause this problem.
after removing the air box, I found this pipe below which was on its own and not connected to anything and was just wondering if anyone knew what it was. personally I think it could be a breather pipe but just wanted to check before I carried on, see pic below.
 
Hi,
most likely you have already solved the problem.
If not you can see where the hose has to be attached:
 

Attachments

  • 27-12-_2020_19-16-33.jpg
    27-12-_2020_19-16-33.jpg
    75.4 KB

New Posts

Back
Top